Stereophonic

Stereophonic User Manual.

Full-Range Power Output @ 4 ohms65 watts RMS x 2 channels @ 4 ohms
Subwoofer Power Output @ 4 ohms170 watts RMS x 1 channel @ 4 ohms
Full-Range Power Output @ 2 ohms90 watts RMS x 2 channels @ 2 ohms
Subwoofer Power Output @ 2 ohms229 watts RMS x 1 channel @ 2 ohms
Full-Range Frequency Response40Hz – 65KHz
Subwoofer Frequency Response24Hz – 250Hz
Total Harmonic Distortion<0.2%
Signal to Noise Ratio (EIA rated)>95dB
Bass Boost0-12dB @ 50Hz
Input Sensitivity200mV – 6.0 volts
Crossover Slope24dB
High Pass Filter (HPF) Frequency Range40Hz – 400Hz
Low Pass Filter (LPF) Frequency Range50Hz – 250Hz
Fuse* (fuse door on bottom of amplifier)30 amp ATC Style
Dimensions (inches)9.4” W x 5.3” D x 1.87” H
Dimensions (mm)240mm W x 134mm D x 47.5mm H

*An additional 30 amp fuse (not included) must be used on the Battery (+) wire at the battery. The fuse must be placed as close as possible to the positive (+) battery terminal (within 6-8 inches away).

Was this article helpful?

Related Articles