Amplifier Troubleshooting Will Not Power On Using a multimeter, check the voltage on the main power wire (B+) at the amp. It...
Connecting Your Radio to Your Vehicles Speakers RetroSound® radios are designed to work with 4-ohm speakers. Be sure to check your existing speakers and replace them if they are...
How to Change Your Display Color Display Color Motor 2, Motor 4 The default setting is SCAN, which will scan through all of the available colors....
Pairing a Bluetooth® Device When connecting a Bluetooth® device for the first time, you must first pair the device with the unit. For most devices,...
Setting the Clock and Other Menu Items Accessing the sub-menu system menu: Press and hold the right front knob for 3 seconds, then release, to access the...
Speaker Basics Types of Speakers Our speakers come in many different sizes and configurations. We will cover the basic types in this...
Wiring Your Radio Basic Wiring: If you do not connect ALL of these wires the radio WILL NOT work. Yellow Wire: 12 Volts...
Wiring Your Speakers STANDARD DUAL VOICE COAL (DVC) DASH SPEAKER WIRING USING A SINGLE SPEAKER USING THE LEFT AND RIGHT FRONT SPEAKER OUTPUTS...
How to adjust radios brightness Dimmer High/LowThis sub-menu sets the radio’s display brightness to high (DIMM HIGH),medium (DIMM MEDIUM), or low (DIMM LOW). To access...
Installing the hands-free Bluetooth microphone The microphone supplied with your Radio Motor is needed to make and receive phone calls through your RetroSound radio. Before...