1. Home
  2. Troubleshooting
  3. Reset Radio Mode

Reset Radio Mode

If you have mistakenly changed your Motor to use a Face/Panel you do not have:

1. Turn the ignition off and wait 30 seconds.
2. Turn the ignition on once the radio boots up and RETROSOUND scrolls across the screen press and hold the Radio on button for approximately 15 seconds to reboot the radio into SEL PANEL mode.
3. Once SEL PANEL is displayed release the Power Button and then press and release it until your Panel/display type is displayed on the screen. The Display will Flash your selection 5 times and will turn off.

(See below for your face type Power on)

  • Standard Knobs (Shafts) press and hold left front knob.
  • Thumb rollers press and hold left inside thumb roller.
  • Grand Prix press and hold ON/Off power button

Was this article helpful?

Related Articles