1. Home
  2. How To Articles
  3. Radio cuts in and out or skips when using USB or AUX inputs.

Radio cuts in and out or skips when using USB or AUX inputs.

Possible Cause: RF interference from high performance ignition systems

Action: Make sure main control box is isolated from firewall (use the rubber boots that came with the ignition module)

Possible Cause: Advanced or improper ignition timing

Action: Adjust the ignition timing back to factory specs, so that it does not fire prematurely. Check the distributor for cracks or a loose cap. check the rotor for burns of pits on the surface. Test the ignition coil for proper function.

Was this article helpful?

Related Articles